University of Southern California Mork Family Department of Chemical Engineering and Materials Science The USC Andrew and Erna Viterbi School of Engineering USC
Sitemap  |  Contact Us

Terence G. Langdon


Professor
 
 
Research Interest
  • Mechanical properties of metals and ceramics
  • Creep
  • Superplasticity
  • Processing and properties of ultrafine-grained materials
  • Severe plastic deformation

    Other Link
    • See Prof. Langdon's webpage for Department of Aerospace and Mechanical Engineering
    Contact Information

    Web Site: 
    E-mail:          
    langdon@usc.edu             
    Mailing Address:      
    Department of Aerospace and Mechanical Engineering
    University of Southern California
    Olin Hall of Engineering, Room 430G
    3650 McClintock Avenue
    Los Angeles, CA 90089-1453               
    Office Location:           
    OHE 430G
    Office Phone:          
    (213) 740-0491
    Fax:        
    (213) 740-8071

     
    Education
    1965 Ph.D. Physical Metallurgy, Imperial College, University of London, U.K.
    1961 B.Sc. Physics with Pure and Applied Mathematics, University of Bristol, U.K.

    Research Images

    Selected Publications 
    1. Langdon, Terence, "Superplasticity of Bulk Nanostructured Materials," Bulk Nanostructured Materials, 2009
    2. Figueiredo, R; Langdon, Terence, "Achieving Microstructural Refinement in Magnesium Alloys through Severe Plastic Deformation," Materials Transactins, 2009
    3. Figueiredo, R; Kawasaki, M; Langdon, Terence, "Developing Superplasticity in Metallic Alloys through the Application of Severe Plastic Deformation," Materials Science Forum, 2009
    4. Figueiredo, R; Langdon, Terence, "Factors Influencing Superplastic Behavior in a Magnesium ZK60 Alloy Processed by Equal-Channel Angular Pressing," Materials Science and Engineering, 2009
    5. Kawasaki, M; Langdon, Terence, "Flow Behavior of a Superplastic Zn-22% Al Alloy Processed by ECAP," Materials Science and Engineering, 2009, 48-51
    6. Wang, Z; Wang, Y; Liao, X; Zhao, Y; Lavernia, E; Zhu, Y; Horita, Z; Langdon, Terence, "Influence of Stacking Fault Energy on Deformation Mechanisms and Dislocation Storage Capacity in Ultrafine-Grained Materials," Scripta Materialia, 2009
    7. Furukawa, M; Horita, Z; Langdon, Terence, "Principles of Deformation in Single Crystals of Two Different Orientations Processed by ECAP," Materials Science and Engineering, 2009
    8. Langdon, Terence, "Research on Bulk Nanostructured Materials in Ufa: Twenty Years of Scientific Achievements," Materials Science and Engineering, 2009
    9. Figueiredo, R; Kawasaki, M; Langdon, Terence, "The Mechanical Properties of Ultrafine-Grained Metals at Elevated Temperatures," Reviews on Advanced Materials Science, 2009
    10. Edalati, K; Horita, Z; Langdon, Terence, "The Significance of Slippage in Processing by High-Pressure Torsion," Scripta Materialia, 2009
    11. Xu, C; Langdon, Terence, "Three-Dimensional Representation of Hardness Distributions after Processing by High-Pressure Torsion," Materials Science and Engneering, 2009
    12. Kawasaki, M; Xu, C; Langdon, Terence, "Extending Flow in High-Temperature Creep to Materials with Ultrafine Grain Sizes," Plasticity, Failure and Fatigure in Structural Materiaals - from Micro to Nano, 2008
    13. Horita, Z; Langdon, Terence, "Achieving Exceptional Superplasticity in a Bulk Aluminum Alloy Processed by High-Pressure Torsion," Scripta Materialia, 2008
    14. Figueiredo, R; Kawasaki, M; Xu, C; Langdon, Terence, "Achieving Superplastic Behavior in F.C.C. and H.C.P. Metals Pocessed by ECAP," Materials Science and Enginering A, 2008
    15. Zhilyaev, A; Swaminathan, S; Gimazov, A; McNelley, T; Langdon, Terence, "An Evaluation of Microstructure and Microhardness in Copper Subjected to Ultra-High Strains," Journal of Materials Science, 2008
    16. Kawasaki, M; Beyerlein, I; Vogel, S; Langdon, Terence, "Characterization of Creep Properties and Creep Textures in Pure Aluminum Processed by Equal-Channel Angular Pressing," Acta Materialia, 2008
    17. Gubicza, J; Chinh, N; Labar, J; Hegedus, Z; Szommer, P; Tichy, G; Langdon, Terence, "Delayed Microstructural Recovery in Silver Processed by Equal-Channel Angular Pressing," Journal of Materials Science, 2008
    18. Zhao, Y; liao, X; Horita, Z; Langdon, Terence; Zhu, Y, "Determining the Optimal Stacking Fault Energy for Achieving High Ductility in Ultrafine-Grained Cu-Zn Alloys," Materials Science and Engineering A, 2008
    19. Kai, M; Horita, Z; Langdon, Terence, "Developing Grain Refinement and Superplasticity in a Magnesium Alloy Processed by High-Pressure Torsion," Materials Science and Engineering A, 2008
    20. Figuiredo, R; Langdon, Terence, "Developing Superplasticity in a Magnesium AZ31 Alloy by ECAP," Journal of Materials Science, Jan 2008
    21. Chinh, N; Gubicza, J; Czeppe, T; Lendvai, J; Hegedus, Z; Xu, C; Langdon, Terence, "Effect of Pre-Aging on the Microstructure and Strength of Supersaturated AlZnMg Alloys Processed by ECAP," Materials Science Forum, 2008
    22. Lapovok, R; Estrin, Y; Popov, M; Langdon, Terence, "Enhanced Superplasticity in a Magnesium Alloy Processed by Equal-Channel Angular Pressure with Back-Pressure," Advanced Engineering Materials, 2008
    23. Xu, C; Szaraz, Z; Trojanova, Z; Lukac, P; Langdon, Terence, "Evaluating Platic Anisotropy in Two Aluminum Alloys Processed by Equal-Channel Angular Pressing," Materials Science and Engineering A, 2008

    More Publications...